Link Seal Calculator
Precise sizing for pipe-to-wall penetrations. Works for Garlock, CCI, GPT, Metraflex, Thunderline & Innerlynx link seals — US inches standard.
Link Seal Sizing Tool
Enter pipe outer diameter (OD) and wall opening (sleeve ID) in inches. We'll recommend the correct link seal series and number of links based on 2026 industry charts (Garlock & CCI compatible).
Recommended link seal configuration:
Enter pipe and opening dimensions to get instant sizing.
Based on standard annular space guidelines (0.25"–2.5"). For precise applications, always verify with manufacturer data sheet.
Link Seal Sizing Chart Calculator (2026 Reference)
| Pipe OD (inches) | Annular Space (in) | Link Seal Series | # of Links (Typical) | Max Pressure (psi) |
|---|---|---|---|---|
| 0.84 – 1.66 | 0.25 – 0.75 | #1 (1/2") | 2 links | 20 psi |
| 1.90 – 2.88 | 0.38 – 1.00 | #2 (3/4") | 2-3 links | 20 psi |
| 3.00 – 4.50 | 0.50 – 1.25 | #3 (1") | 3 links | 20 psi |
| 4.75 – 6.63 | 0.63 – 1.50 | #4 (1.25") | 3-4 links | 15 psi |
| 6.90 – 8.63 | 0.75 – 1.75 | #5 (1.5") | 4 links | 15 psi |
| 9.00 – 12.75 | 0.88 – 2.00 | #6 (2") | 4-5 links | 10 psi |
| 14.00 – 18.00 | 1.00 – 2.50 | #7 (2.5") | 5-6 links | 10 psi |
Pro tip 2026: For GPT link seal calculator & CCI link seal calculator compatibility, the annular space formula = (Hole ID - Pipe OD) / 2. Always ensure gap does not exceed max link expansion.
Exclusive Checklist: Perfect Link Seal Installation
- Step 1: Measure precisely – Use digital calipers for pipe OD and sleeve ID. Record in inches (US standard).
- Step 2: Determine annular space – (Opening diameter – pipe OD) ÷ 2. Compare with link seal size range (0.25” to 2.5”).
- Step 3: Select link series – For Garlock link seal calculator, series #1 to #7 cover most residential/commercial.
- Step 4: Calculate number of links – Total annular space ÷ link height (e.g., series #3 height = 1.0"). Round up.
- Step 5: Assemble & torque – Follow manufacturer psi recommendations (max 20 psi for hydrostatic).
Garlock & GPT Link Seal
Garlock link seal calculator follows standardized rubber links. Our tool matches series #1–#7 with 0.25” increments. GPT link-seal calculator compatibility included.
CCI / Innerlynx / Metraflex
CCI link seal calculator & Innerlynx link seal calculator use similar methodology. PSI ratings may vary; refer to CCI link seal technical data.
Related Home Improvement Calculators
Frequently Asked Questions (Link Seal Sizing)
A link seal calculator determines the correct size and number of rubber links to seal pipe penetrations through walls, floors, or manholes. Prevents leaks and provides hydrostatic seal.
Yes, our tool is based on universal annular space standards. For Garlock link seal calculator, CCI link seal calculator, and GPT link-seal calculator, results are interchangeable but always verify with brand literature.
Most link seal series accommodate annular gaps from 0.25” up to 2.5”. Larger gaps require multiple stacked links or special engineering (consult manufacturer).
Use a caliper or wrap tape measure. Measure the outer diameter in inches (US). For irregular pipes, average three measurements. Our link seal sizing calculator uses precise inches.
Yes. Standard link seals support up to 20 psi for water/gases. For higher pressure, use reinforced link seals or consult Metraflex / Thunderline engineering guides.
Link seals consist of interlocking rubber links that expand radially, ideal for irregular openings. Mechanical seals use compression plates. Link seal calculator provides quick, field-friendly sizing.
Absolutely. Our link seal chart calculator follows 2026 industry standard dimensions used across US home improvement & industrial sectors.
Important disclaimer – please read
TotalCalcHub’s link seal calculator provides estimates for planning purposes only. Always confirm sizing with original manufacturer specifications (Garlock, GPT, CCI, Metraflex). Professional engineering advice is recommended for critical pressure applications.